De-Coiler And Re-Coiler

We are offering a comprehensive range of Heavy Duty De-Coiler Machine that is extensively used wherein, the coils are loaded on its internal diameter on the expandable drum of the de-coiler. The centering of these de-coilers is done by movement of screw on the front side and the main shaft of EN8 is toughened to withstand heavy loads, mounted on two radial ball bearings. Heavy Duty De-coilers are provided with shoe type brake de coiling.

Features :

• Sheet Width :- 1500 MM
• I.D:- 400mm-600mm
• O.D:-1800mm-2000mm
• Thickness:- 5-6mm

Application :

• In automobile Industry
• In electrical Industry
• In Gas fit Industry

We are offering a wide gamut of Double Head De-Coiler that is fabricated using the high-grade raw material. Double Head De-Coiler are available with a drive system that is A.C. fixed speed and A.C. variable speed (optional). Our range of de-coiler has three or four self-centring holding heads housed in mechanical and ground housing and rotates on dust proofed sealed bearing element. All the motorized de coilers are chain driven soft start & stop through mechanical torque limiter & friction drag brake.

Specifications:

• Drive system: A.C. fixed speed and A.C. variable speed
• Control panel: It is available with suitable loop control system to maintain loop of coil for the machine via antenna type loop sensors/limit arm through limit switches/photo sensors
• In twin spindle de-coiler, two mandrels are housed on a turret and turret is supported on antifriction bearings for reducing friction while indexing. Turret is locked by spring loaded plunger 7 released by a foot pedal.
  

Available options:

• All units are available is non-motorized version with drag brake
• Electro Magnetic or Pneumatic Brake
• Coil hold-down (hydraulic or pneumatic) for springy material
• Hydraulic Jaws Expansion
• De-coilers with Shafting & Key to load bobbin

We are engaged in offering a wide range of Vertical De-coilers that is widely appreciated for user-friendly and demand negligible maintenance. These rigid fabricated structures are available with three or four self-centring coil-location jaws along with, the mechanical gear reducer for models 2.5 tone /3.0 tones. Moreover, in twin spindle de-coiler, two mandrels are housed on a turret and turret is supported on antifriction bearings for de-coiler and recoiler reducing friction while indexing. The turret is locked by spring loaded plunger released by a foot pedal.

Features :

• Sheet Width :- 1500 MM
• I.D:- 400mm-600mm
• O.D:-1800mm-2000mm
• Thickness:- 5-6mm

Application:

• In Automobile Industry
• In Electrical Industry
• In Gas fit Industry

We are a reckoned name in the industry offering a comprehensive range of Industrial Recoiler Machine that is widely appreciated by our esteemed clients. Industrial Re-Coiler units are available with non-motorized version and drag brake, to make this user-friendly and apt for various industrial applications. Our range is fabricated as per set industry standards and stringently checked on various parameters by our qualified quality controllers

Technical specifications:

• Sturdy fabricated structure
• Three or four self centering coil-location jaws, with mechanical gear reducer for models 2.5 tonnes / 3.0 tonnes
• The spindle & coil holding heads housed in mechanical & ground housing & rotate on dust proofed sealed bearing element
• All motorized de-coilers are chain driven soft start & stop through mechanical torque limiter & friction drag brake
• Drive System: A.C. fixed speed and A.C. variable speed (optional)
• In twin spindle de-coiler, two mandrels are housed on a turret and turret is supported on anti friction bearings for reducing friction while indexing.
• Turret is locked by spring loaded plunger 7 released by foot pedal (This is for quick coil changeover & saving coil loading time)
• Control panel with suitable loop control system to maintain loop of coil for the machine via antenna type loop sensors/limit arm through limit switches / photo sensors

Available options:

• Electro Magnetic or Pneumatic Brake
• Coil hold-down (hydraulic or pneumatic) for springy materials
• Hydraulic Jaws Expansion
• De-coilers with Shafting & Key to load bobbin

Product Details :

Motor power	1 to 14 hp or as per the coil weight
Brand	Makewell Controls
Coil width	100 to 1500 mm
Service type	Installation & repairing
Power source	Electric
Product type	Recoiler

We are engaged in manufacturing and exporting of a wide range of user friendly De-Coilers that has user friendly design and is available in cost effective prices. These de-coilers are available with spindle & coil holding heads housed in mechanical & ground housing & rotates on dust proofed sealed bearing element. Moreover, their control panel has suitable loop control system to maintain loop of coil for the machine via antenna type loop sensors or limit arm through limit switches or photo sensors.

The product includes:

• Rigid fabricated structure
• Three or four self centering coil-location jaws, with mechanical gear reducer for models 2.5 tonnes / 3.0 tonnes
• The spindle & coil holding heads housed in mechanical & ground housing & rotates on dust proofed sealed bearing element
• All motorized de-coilers are chain driven soft start & stop through mechanical torque limiter & friction drag brake
• Drive System: A.C. fixed speed or A.C. variable speed (optional)
• In twin spindle de-coiler, two mandrels are housed on a turret and turret is supported on anti-friction bearings for reducing friction while indexing.
• Turret is locked by spring loaded plunger & released by foot pedal. (this is for quick coil changeover & saving coil loading time

Option :

• All units are available is non motorized version with drag brake
• Electro magnetic or pneumatic brake
• Coil hold-down (hydraulic or pneumatic) for springy material
• Hydraulic jaws expansion
• De-coilers with shafting & key to load bobbin

We are offering Large Width Decoiler large width having rigid fabricated structure and have three/four self Centering Coil-location jaws. These are offered with mechanical gear reducer for models 2.5 Tonne/3.0 Tonne.

Features :

• Sheet Width :- 1500 MM
• I.D:- 400mm-600mm
• O.D:-1800mm-2000mm
• Thickness:- 5-6mm

Application :

• In automobile Industry
• In electrical Industry
• In Gas fit Industry

Note :

• All units are available is non motorized version with drag brake.
• Electro Magnetic or Pneumatic Brake.
• Coil hold-down (hydraulic or pneumatic) for springy materials.
• Hydraulic Jaws Expansion
• Decoilers with Shafting & Key to load bobbin.
• Other Special features on demand

Our de-coiler H- types have all motorized decoilers are chain driven soft start & stop through mechanical torque limiter & friction drag brake. The product includes features like:

• Rigid Fabricated Structure
• Three/Four Self Centering Coil-location jaws. With mechanical gear reducer for models 2.5 Tonne/3.0 Tonne
• The Spindle & Coil holding heads housed in mechanical & ground housing & rotate 4s on dust proofed sealed bearing element.
• Drive System: A.C. Fixed Speed/A.C. Variable Speed (optional)
• Control panel with Suitable loop control system to maintain loop oaf coil for the machine via Antenna Type loop sensors/limit arm through limit Switches or photo sensors.
• In Twin Spindle Decoiler, two mandrels are housed on a Turret and Turret is supported on antifriction bearings for reducing friction while indexing. Turret is locked by spring loaded plunger 7 released by foot pedal. (This is for quick coil-changeover & saving coil loading time.

Option :

• All units are available is non motorized version with drag brake.
• Electro Magnetic or Pneumatic Brake.
• Coil hold-down (hydraulic or pneumatic) for springy materials.
• Hydraulic Jaws Expansion
• Decoilers with Shafting & Key to load bobbin.
• Other Special features on request.

Components of whole set roll former :

• The De-coiler.
• Coil Sheet Guiding and Adjusting Equipment.
• Film Covered Device.
• Main Roll Forming System.
• Post-Cutting Device.
• Hydraulic Station.
• PLC Control System.
• Support Table.

We are offering de-coiler having rigid fabricated structure and have three/four self Centering Coil-location jaws. These are offered with mechanical gear reducer for models 2.5 Tonne/3.0 Tonne

Option :

• All units are available is non motorized version with drag brake.
• Electro Magnetic or Pneumatic Brake.
• Coil hold-down (hydraulic or pneumatic) for springy materials.
• Hydraulic Jaws Expansion
• Decoilers with Shafting & Key to load bobbin.
• Other Special features on demand

We are dealing in a wide range of Horizontal Decoiler.